Silicone Sealant – excellent adhesive strength. Ideal for use on copper and applications involving large gaps. High temperature resistance. Label-free.
LOCTITE SI 5990 is a non-corrosive silicone sealant and cures on exposure to moisture in the air to form a tough rubber gasket. The nature of LOCTITE SI 5990 reduces the migration of liquid product after application to the part. It has excellent temperature resistance characteristics and can also be used for electrical insulating applications. This product is typically used in applications up to 350C. The product has leading health and safety features.
High temperature resistance
Electrical insulating product
Suitable for all kinds of surfaces including metals, plastics
Oil resistant
Leading in health & safety features
Copper colour
Brand = LOCTITE
Related products = LOCTITE SF 7471 Activator – 150ml105347/imagelibrary_sml/105347_pic1.jpgLOCTITETransparent, yellow to amber liquid activator used for increasing the cure speed of LOCTITE anaerobic products under low prevailing temperatures.LOCTITE SF 7471 is transparent, yellow to amber liquid activator used where increased cure speed of LOCTITE anaerobic products is required. It is especially recommended for applications with passive metals or inert surfaces and with large bond gaps. LOCTITE SF 7471 is particularly recommended when prevailing temperature is low (Less than+15C).For large bond gapsSpeeds up cure on passive and active surfacesOn-part life Less than or = 7 daysLOCTITE SF 7200 Gasket Remover – 400ml19206/imagelibrary_sml/19206_pic1.jpgLOCTITEParts Cleaner – gasket remover. Removes gasket sealants in 10-15 minutes.LOCTITE SF 7200 is designed to remove cured chemical gaskets by softening the material on the flanges. Once applied, the product develops a foam-like layer on the gasket, preventing the agent from running off the desired location. It therefore keeps working for the required duration. Typical applications include removal of all types of chemical gaskets from metal flanges. It is particularly suitable for aluminum or other soft metal flanges where scraping could lead to surface damage.Removes cured gasket sealants and traditional gaskets in 10 to 15 minutesMinimal scrapingUsable on most types of surfaceLOCTITE SF 7063 Parts Cleaner – 400ml50952/imagelibrary_sml/50952_pic1.jpgLOCTITEParts Cleaner – general purpose. For use prior to bonding and sealing applications. Leaves no residue.LOCTITE SF 7063 is our general-purpose product for cleaning and degreasing any kind of surface or machinery component before proceeding with a repair or assembly job involving LOCTITE adhesives. It is a solvent-based cleaner and the product leaves no residue. LOCTITE SF 7063 removes most greases, oils, lubrication fluids and metal cuttings.Solvent-based general parts cleanerIdeal for use prior to adhesive bonding and sealing applicationsRemoval of most greases, oils, lubrication fluids, metal cuttings and fines from all surfacesLeaves no residueLOCTITE SF 7649 Activator – 150ml51875/imagelibrary_sml/51875_pic1.jpgLOCTITELOCTITE SF 7649 is a solvent-based activator for surface preparation that provides for low temperature curing.LOCTITE SF 7649 is designed to promote the curing speed of LOCTITE anaerobic adhesives and sealants without any significant loss of joint strength. It is especially recommended for applications with passive metals or inert surfaces and with large bond gaps. LOCTITE SF 7649 offers good performance at low cure temperatures, and is recommended when the application temperature is below 15C.Increases cure speed on passive and inactive surfacesFor low-temperature curing (Less than5C)For large bond gaps105347, 19206, 50952, 51875
Size = 100ml
Tariff Code = 3506100000

Suitable For Information
This product is not associated with any particular make or model

OEM Fitment Information
This product is not associated with any particular OEM part number