Super supple and very comfortable craftsman trousers made of softshell fabric with 4-way stretch. Thanks to the softshell fabric, the trousers have a comfortable soft stretch and are completely windproof, making them ideal for outdoor activities in colder temperatures. And because they are also water-resistant, these craftsman trousers are suitable for wet conditions too. In addition, the trousers have a number of smart and functional details, such as CORDURA reinforced nail pockets, extra zip-up pockets for safe storage, an easy-access pocket in stretch material suitable for most mobile phones and black, discreet reflective trim on the calf.

FUNCTION

MAIN MATERIAL

92% polyester, 8% elastane, 3-layer softshell, waterproof 10 000 mm, windproof, breathable 4000 g/m/24H, stretch, 255 g/m

FUNCTIONALITY

Breathable wind- and water-proof material, no taped seams, making the garment highly water resistant, 2-way stretch

REINFORCEMENT

Cordura-stretch reinforced kneepockets, Reinforced nail pockets, putty knife pocket, back pockets and back on the leg bottom

DETAILS

Plastic zipper fly
Two belt loops on the sides with a button for hammer loop, one belt loop with D-ring on the front. Wide belt loop back
Metal buttons
Knife holder with button
D ring in waistline
Inner leg seam with 3-needle stitching
Removable ID pocket

POCKETS

Back pockets with bellow
Leg pocket with bellows, pen pocket, Flex-phone pocket and two large pockets were one is with zippered, removable ID card pocket
Insert pocket with stretch panel
Knee protection pockets
Nail pockets – with tool holders and extra pockets with zip
Reinforced ruler pocket with knife holder and pen pocket

FINISH

Leg bottom with reinforcement on back

REFLEX

Reflective detail on legs, Reflective detail on leg pocket

QUALITY & WASHING CARE

92% polyester, 8% elastane, 3-layer softshell, waterproof 10 000 mm, windproof, breathable 4000 g/m/24H, stretch, 255 g/m

Lightweight 3-layer softshell fabric with 4-way stretch. Wind- and waterproof, breathable. The fabric is Oeko-tex 100 certified.

WAIST SIZE ADVICE AND GUIDELINES

Blaklader Workwear is produced with precision.

• Take your best fitting trousers or shorts, DON’T use the measurement given on the label to assume your size.
• Pull the waist tight and measure the inside. Measurements of Blaklader are in inches.
• Take the measurement, and double it to find the full length of the waist.

IE. An inside measurement of 40.6cm, will be a 81.2cm waist or 32 inches.

If in doubt, please come in store or contact us.